E-flite Blade mCP X

From RC Helicopter Wiki
(Redirected from Blade mCP X)
Jump to: navigation, search
E-flite Blade mCP X
E-flite Blade mCP X.jpg
Manufacturer E-flite
Class (Ultra) Micro
Build RTF / BnF
LevelIntermediate to Advanced
Rotor head
Head blockPlastic
Drive systemDirect
Auto drivenNo
Boom strut materialPlastic
Empty weight1.6 oz (45.5g)
Height3.65 in. (93mm)
Landing gearPlastic
Main rotor diameter9.65 in (245mm)
Length9.25 in (235mm)

Marketing blabber

The Blade mCP X the lightest flybarless helicopter in its class. An ultra-micro collective pitch helicopter, it is designed for intermediate to advanced pilots. More specifically the mCP X will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Obviously the lower cost involved also makes it a much more economical alternative when learning.

It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM receiver, ESCs, gyros and a 2.4GHz DX4e DSM2 transmitter.

As well as the heli itself in the box are two 1S 200mAh 25c batteries, a single port charger with AC adapter and a 1s High Current Ultra-Micro Battery adaptor lead. Also included are a pair of optional fast-flight main rotor blades for when confidence has grown. Transmitter batteries are also included.

Using an integrated Flybarless system, this awesome little heli to gets up in the air without a mechanical flybar. The benefits of this system provides reduced drag on the main rotor head which results in more power, longer flight times, and provides the pilot the best of both worlds between stability and agility.

The Blade mCP X is the ultimate ultra micro heli experience. Its revolutionary GX3™ flybarless system, the most advanced on any ultra micro heli, delivers a level of power and cyclic response that is second to none. This, combined with the exceptionally small, lightweight mCP X airframe makes it possible to precisely fly extreme aerobatics in spaces no larger than a living room or conference room.


Type: Flybarless Ultra Micro Helicopter

Main: Rotor Diameter 245mm (9.65 in)

Length: 235mm (9.25 in)

Height: 93mm (3.65 in)

Tail Rotor: 36.5mm (1.4 in)

Weight: 45.5 g (1.6 oz)

Batteries: 1S 3.7V 200mAh 25C LiPo

Charger: E-flite™ Celectra™ DC LiPo balancing charger and AC power supply plus High-Current Ultra Micro Battery Adapter Lead

Radio (RTF): Spektrum™ DX4e 2.4GHz DSM™ transmitter with 4 AA batteries

BNF: 4+ Channel DSM2 Aircraft transmitter required (BNF)

Share your opinion